Nederlandse Modelbouw en Luchtvaartsite

Dutch Modelling and Aviation

In Memoriam

Klaas Willem Jonker
† April 30, 2018

On Monday 30 April 2018, Wilko Jonker died after a long illness at the age of 58. He leaves behind a wife and two children. The Dutch military aviation and plastic modeling were his hobby and on this website he shared all the knowledge he has collected over the years. His hobby has been able to distract him from the persistent disease in his body until the last week of his life. The contacts with other hobbyists were a major support for him.

This website will be maintained by different people for as long as possible, so that other enthusiasts can continue to benefit from extensive content.

Bristol F2B Fighter


Development of this aircraft started in 1916, when Frank S. Barnwell began to design an successor of the R.A.F. R.E.8 and of the F.K.8.
The first prototype Bristol Type 9 R.2A was equipped with a Beardmore engine, rated at 190 hp, whereas the second prototype was equipped with a Hispano Suiza rated at 150 hp.
At about the same time the new Rolls Royce Falcon engine, rated 190 hp was released. Both R.2- aircraft were not put into production, but Barnwell developed an new aircraft, the Type 12 F.2A
This was an two seat fighter which made it maiden flight in September 1916.
As armament it was equipped with a synchronized .303 inch Vickers machine gun and a flexible mounted Lewis .303 inch for the gunner.
There were just 52 F.2As built when production of the next version started, the Bristol Type 14 F.2B. This type made its maiden flight in October 1916. The first examples had the Falcon I or Falcon II engine, later the Falcon III rated 275 hp was mounted.
The F.2b was faster than the F.2A, with a maximum speed of 198 km/h; also a second Lewis machine gun was added.

The Rolls Royce engines were rather hard to find, so attempts were made to find a alternate engine.
Several aircraft were equipped with the Sunbeam Scarab of 200 hp under the designation Type 15. This engine suffered many problems, such as heavy vibration. For this reason this model had a limited production.
The Bristol Type 16 was equipped with a Hispano-Suiza rated 200 hp. Alas this engine was hardly available as it was already used for the S.E.5A and the Sopwith Dolphin.
The Bristol Type 17 was equipped with a Hispano-Suiza rated 300 hp, but was available in sufficient quantities after the war.

Other examined engines were the 200 hp RAF 4d, the Wolseley Viper rated 180 hp and the Armstrong Siddeley Puma rated 230 hp.
A proposed version with a radial engine was the Bristol Type 22 F.2C.

American versions.

The United States Army Engineering Division planned to produce a version of the Bristol Fighter equipped with the Liberty L-12 engine.
This engine proofed to be to heavy for the Bristol, so only 27 were built. Attempts to obtain the better suitable Liberty 8 or Hispano-Suiza of 300 hp encountered political and practical problems.

Post war developments.

After the war a two seats version, the Bristol Type 14 F.2B Mk II, was developed. It had tropical equipment and made its first flight in December 1919. Almost 500 examples were built.
The Bristol Type 96 Fighter Mk III and Type 96A Fighter Mk VI had structural improvements and fifty were built in 1926 and 1927. Surplus F.2Bs were modified for civilian use, the Bristol Tourer was an F.2B fitted with an Armstrong Siddeley Puma engine and canopies.


Technical Information
Length: 7,87 m Wingspan: 12,09 m
Height: 2,97 m Wing area: 37,72 m2
Empty weight: 791 kg Max. start weight: 1474 kg
Max. speed: 201 km/hr Rate of climb: 6,5 minutes to 1980 m
Range: 3 hours Service ceiling: 6100 m
Engine type: One Rolls Royce Falcon III rated 275 pk.
Crew: Two men.
Armament: One fixed forward firing Vickers machine-gun plus one or two movable Lewis machine-guns;
12 * 9 kg bombs.


An aircraft of this type made an emergency landing on September 29, 1917 between Sluis and Zuidzande in Zeeuws-Vlaanderen. It was interned and moved to Soesterberg, where it arrived on October 8, 1917.

After overhaul Lt. Versteegh flew with it on January 23, 1918.
After the war Lt. Versteegh and Hofstee flew with it to England on September 30, 1919 and returned to the Netherlands on October 13, 1919.

Bristol F.2B B1124, geïnterneerd te Zuidzande 29 sept. 1917. BE.2C LA24. Sub.Lt. J. Frost, F.L. Smith. RFC No. 48 Sq.
Bristol F.2B B1124, interned near Zuidzande, September 29, 1917;
[Enclosed photo from BeeldBank NIMH. Click on photo for ordering information]
Zijaanzicht Bristol F.2B BR401, ex-B1124. Met oranje bollen.
Side view Bristol F.2B BR401, ex-B1124 with orange national insignia.
[Enclosed photo from BeeldBank NIMH. Click on photo for ordering information]
Bristol F.2B BR401, ex-B1124. Met oranje bollen.
Bristol F.2B BR401, ex-B1124 with orange national insignia.
[Enclosed photo from BeeldBank NIMH. Click on photo for ordering information]
Bristol F.2B BR401, ex-B1124.
Detail of the marking (applied only) on the right side of the Bristol F.2B BR401, ex-B1124.
[Enclosed photo from BeeldBank NIMH. Click on photo for ordering information]


SerialConstruction nr.RFC SerialDate in serviceDate out of serviceNotes
BR-401   B1124 29-09-1917 1920  


1/72nd Scale


  • Airfix
    • Kit 01005: an older model, re-released every now and than.
  • Classic Plane
    • Kit CPM Bristol: Siddely-Puma Bristol Fighter: Airfix F2B kit with new fuselage, engine and decals.
    • Kit CPL Brisol: Hispana-Suiza Bristol Fighter (BAF): Airfix F2B kit with new fuselage, engine and decals.
  • Pegasus
    • Kit 4012: Two seat fighter.
  • Roden
    • Kit 043: injection moulded kit


A model of a Bristol F2B, built by Peter Banis.

Bristol F2B PBanis 1 Bristol F2B PBanis 2 Bristol F2B-Banis-3 Bristol F2B Peter Banis Bristol F2B Peter Banis


Modelling add-on

  • Roden
    • Set S72-205: foto-ets detaillingsset



1/48th Scale


  • Aeroclub
    • Kit F2B: A model of a Bristol F2B Fighter.
  • Blue Max
    • Kit 203: A model of a Bristol F2B Fighter.
  • Eduard
    • Kit 8488: A model of the Bristol F2B Fighter with decals for an example of 62 squadron RFC Frane 1918.
    • Kit 8126: A model of the Bristol F2B Fighter.
    • Kit 1127: A model of the Bristol F2B Fighter "the Crocodile" .
  • Roden
    • Kit 425: A model of a Bristol F2B Fighter.
    • Kit 428: A model of a Bristol F2B Fighter Mk. IV
    • Kit 429: A model of a Bristol F2B Fighter (with Sunbeam Arab Engine).

Modelling add-on

  • Part Etchings
    • Set S48133: Photo-etch detail set (for Roden)


  • --
    • Set --: --


The fuselage was overall PC10. This colour varied from dark green to brown [between Humbrol H179 to Humbrol H108]; the wings were clear doped linen.
The markings of the RNlAF at that time were orange balls. Visible wooden and metal parts were covered with OP7 varnish, which had a colour similar to PC10.

SchemeColour nameFS numberHumbrolXtraColorVallejo Model ColorVallejo Model Air
Standard #1Fuselage PC10 ~4086   X144 70.830?  
Wings Clear doped linen   121 X105 70.819  

Check for an extensive conversion table with lots of colour and paint systems.

Bristol F2B-1-SMALL
Scheme Bristol F2B: Standard RFC scheme. [note the cock is not applied on this image)



Nederlandse Militaire Luchtvaart in Beeld. deel 1. Hugo Hooftman Pag. 30 1977 Uitgever Europese Bibliotheek, Zaltbommel
Vintage Warbird no 1: The Royal Flying Corps in worldwar One Raymond Laurence Rimell Pag. 18 - 19 1987 Uitgever Arms and Armour Press, Poole, Dorset
Aircraft Archive: Aircraft of World War One; Volume 2.   Pag. 6 - 11 1989 Uitgever Argus Books, Hempsted
Camouflage en Kentekens J.Greuter e.a.   1997 Bonneville – Bergen (NH)
Air Enthusiast no.80, The Historical Aviation Journal: Unexpected Windfalls bart van der Klaauw Pag. 54 - 59 1999 Uitgever Key Publishing, Stamford